Independent contractors, licensed in CT

Covering 2 ZIP codes

Chase Cover Replacement in Enfield, CT

If there are orange streaks running down your chimney, the cause is almost always the metal lid on top of it rather than anything wrong with the siding or the masonry.

  • Covering 2 Enfield ZIP codes
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about a chase cover in Enfield

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chase Cover Replacement in Enfield, Connecticut

What to ask for on Chase Cover Replacement in Enfield

  • Stainless covers made to measure
  • Cross-break so water drains
  • Correct collar and storm seal
  • Fitted with a cap where needed
Call about a chase cover
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Enfield. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Crown rebuilt with a drip edge in Enfield, CT
Crown rebuilt with a drip edge Cast and sloped away from the flue with an expansion joint at the tile, so water drips clear of the brick instead of running down it.
Joints raked back and repointed in Enfield, CT
Joints raked back and repointed Mortar matched to the masonry, because mortar harder than the brick makes the brick the sacrificial part.
Stainless liner sized to the appliance in Enfield, CT
Stainless liner sized to the appliance Diameter taken from the manufacturer venting tables, insulated where the chimney runs cold.

Chase Cover Replacement in Enfield

Much of Enfield's housing was built before central cooling was normal and often before ductwork was, so heating and cooling arrived separately and at different times. That is why so many houses here run a boiler for heat and something entirely different for cooling.

About 64% of homes in Enfield predate 1970, so the original heating system has usually been replaced at least once and cooling added afterward; 49% of them still heat with oil, and oil condensate is acidic enough that those flues deteriorate from the inside where nobody looks. (US Census ACS 2022)

What a chase cover is and why the cheap ones fail

Where a chimney is a framed and clad chase rather than masonry, the top is closed by a sheet-metal cover with a collar around the flue pipe. Builders frequently fit a flat galvanized cover, because it is the least expensive option available.

Flat is the problem. Water sits in the middle instead of running off, and standing water on galvanized steel corrodes it from the top down. Once it perforates, water goes straight into the chase — onto the framing, onto the insulation, and down the inside of the structure — while the visible symptom is only the rust staining outside.

Why stainless with a cross-break

A cross-break is a shallow ridge pressed into the sheet so the surface is not flat and water is forced to the edges. Combined with stainless rather than galvanized, that removes both failure mechanisms at once. It costs more than the builder's cover and it is the last one the chimney needs.

The collar and the storm seal

The cover has to seal around the flue pipe where it passes through. A collar with a proper storm seal does that; a bead of silicone does not, and it is where a lot of otherwise decent covers leak.

What the streaking is telling you

Rust runoff is the late symptom. By the time it is visible on the siding, the cover has been holding water for years and has probably already perforated. What matters is what has been happening inside the chase in the meantime.

Check the chase interior

Water entering a framed chase wets framing and insulation and has nowhere to dry. Before a new cover goes on, the inside is worth looking at, because replacing the lid over rotted framing solves the wrong half of the problem.

On the shoreline, it happens faster

Salt air accelerates the corrosion considerably. Along the Sound and the southeastern shoreline a galvanized cover can be failing in a handful of years, which is why stainless is effectively the only sensible specification near the water.

The full guide: everything about chase cover replacement — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Enfield.

Areas we cover in Enfield

Our Enfield coverage takes in the neighborhoods around Enfield Center, Enfield Square, Enfield Street Area and Enfield Town Green.

Chase Cover Replacement in Enfield — FAQs

How much does chimney work cost in Enfield?

It depends entirely on what the chimney turns out to need, and the spread is wide. Sweeping, an inspection, a cap or a damper repair are the inexpensive end and are usually done in one visit. Relining, rebuilding above the roofline and full crown recasting are the expensive end. Nobody can quote it honestly over the phone, which is why the inspection comes first. The contractor you are introduced to sets their own prices and agrees them with you directly.

Do you cover all of Enfield?

Yes — all 2 ZIP codes in Enfield and the surrounding towns. Tell us where you are and we put you in touch with a company that covers it.

How quickly can someone get to me in Enfield?

For a routine inspection or sweep, usually within a few days, and sooner outside the fall rush. Late spring through early fall is the quiet season and the easiest time to book. If you have had a chimney fire, or you can smell gas or have a carbon monoxide alarm sounding, that is not a scheduling question — leave the building and call emergency services from outside.

My fireplace smokes into the room. What is wrong?

Several possible causes, and they need different work. A blocked cap or arrestor, a damper not opening fully, a smoke chamber that was never parged, a flue too small for the fireplace opening, or a chimney too short relative to the roof around it. A house sealed tight enough to run under negative pressure will also pull air down the flue. An inspection separates them; guessing does not.

Should the chimney be repaired or rebuilt?

It depends how far the damage goes. If a key scrapes mortar out but the brick is intact, that is repointing. Once brick faces have flaked through, a brick can be rocked by hand, or the stack leans, repointing has nothing sound to bond to and a rebuild is the honest answer. Most rebuilds stop at the roofline, because that is the section taking weather from every side.

Do you charge for a quote in Enfield?

We charge nothing at any point — contractors pay us, you never do. What a company charges to attend or to carry out an inspection is theirs to set, so agree it with them before they come out. An inspection is a real piece of work with a written report attached, and it is reasonable for it to be chargeable.

Are chase covers made to measure?

Yes — chases vary in size and in how many flues pass through, so covers are fabricated to the measurements. That is also why a quote requires someone to get on the roof first.

Does the cap go on the cover?

They are separate. The cover closes the top of the chase; the cap sits over the flue opening itself with mesh. Both are usually replaced together because the access is the same visit.

Neighborhoods we cover in Enfield

Chimney work across Enfield and the areas around it.

  • Enfield Center
  • Enfield Square
  • Enfield Street Area
  • Enfield Town Green
  • Freshwater Brook Area
  • Powder Hollow Park
  • Scantic River State Park
  • Shaker Pines
  • Sherwood Village
  • Thompsonville
Call now How it works