Independent contractors, licensed in CT

Covering 3 ZIP codes

Chimney Crown Repair in Greenwich, CT

The crown is the slab at the very top that throws rain clear of the flue. On most older Connecticut chimneys it is a thin mortar wash that cracked years ago, and it is where the water is getting in.

  • Covering 3 Greenwich ZIP codes
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about crown repair in Greenwich

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Crown Repair in Greenwich, Connecticut

What to ask for on Chimney Crown Repair in Greenwich

  • Crack repair and flexible coating
  • Full recasting with a drip edge
  • Expansion joint at the flue tile
  • Usually paired with a cap
Call about crown repair
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Greenwich. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Crown rebuilt with a drip edge in Greenwich, CT
Crown rebuilt with a drip edge Cast and sloped away from the flue with an expansion joint at the tile, so water drips clear of the brick instead of running down it.
Joints raked back and repointed in Greenwich, CT
Joints raked back and repointed Mortar matched to the masonry, because mortar harder than the brick makes the brick the sacrificial part.
Stainless liner sized to the appliance in Greenwich, CT
Stainless liner sized to the appliance Diameter taken from the manufacturer venting tables, insulated where the chimney runs cold.

Chimney Crown Repair in Greenwich

Two things shape chimney work in Greenwich: the age of the building stock, and what the weather does to masonry that has been standing in it for decades. The chimney is rarely the thing that changed — what changed is usually what vents into it.

About 33% of homes in Greenwich were built before 1940 — old enough to have been built with radiators and no ductwork at all; 65% of them heat with natural gas, so oversized flues left behind by an earlier fuel are the recurring finding here. (US Census ACS 2022)

The crown is rarely the only thing

A cracked crown has usually been admitting water for years before anyone notices, and by then the water has been somewhere. Recasting the crown without checking the top few courses of brick underneath is how a chimney gets repaired twice.

Cap at the same time

The crown and the cap are both top-of-chimney work and the access is the same. Fitting a cap while the crown is being done costs far less than a second visit, and an uncapped flue undermines the crown work anyway.

Check the top courses

Where the crown has failed, the brick immediately below it has usually taken water for as long. Those courses often need rebuilding as part of the same job, and a quote that does not mention them is worth questioning.

Why the wash cracks and a proper crown does not

What most houses have is a mortar wash: mortar troweled over the top of the brick, sloped roughly, finishing flush with the outside edge. It has no reinforcement, no expansion joint around the flue tile, and no overhang. Mortar and clay flue tile expand at different rates, so the wash cracks around the tile within a decade, and with no overhang the water that gets through runs straight down the face of the brick.

A crown built properly is a cast slab, two inches or more thick at its thinnest, reinforced, sloped away from the flue, with a bond break or expansion joint where it meets the tile, and projecting past the brick with a drip edge cut underneath so water falls clear.

When a coating is enough

Hairline cracking in a crown that is otherwise sound and correctly shaped can be sealed with a flexible crown coating, which bridges movement in a way mortar cannot. It buys years, it is inexpensive, and it is a reasonable answer on a crown that is structurally fine.

When it has to be recast

Cracks you can get a coin into, missing sections, a wash with no overhang at all, or a crown that has broken up around the flue tile. Coating over that seals water in rather than out.

The full guide: everything about chimney crown repair — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Greenwich.

Areas we cover in Greenwich

That includes properties near Belle Haven, Bruce Museum, Byram and Glenville Road Corridor, and everywhere else in Greenwich.

Chimney Crown Repair in Greenwich — FAQs

I heat with oil in Greenwich — what does that mean for the flue?

Around 8% of homes here heat with oil, and oil soot is acidic. It attacks flue tile and the mortar between tiles from the inside, where a look from the roof will not find it. That is the case for a camera survey rather than a visual inspection. It also matters if you ever convert to gas: the flue will then be far too large for the new appliance and will need relining.

Nothing vents into our chimney any more. Does it still matter?

Less urgently, but yes. An uncapped disused flue collects rain, leaves and nesting for years with nobody noticing, and water sitting inside it damages the structure from within. If the chimney is genuinely finished with, removing it above the roofline and roofing over is a legitimate option. If anything at all still vents into it — a water heater in particular — then it matters as much as it ever did.

What chimney problem is most common around Greenwich?

Multi-flue stacks where each flue has a different appliance and a different requirement. That pattern is regional rather than universal — stamford, Norwalk, Greenwich, Westport, Darien and Danbury. It is worth knowing before you book, because it tells you what someone should be looking hardest at here.

How much does chimney work cost in Greenwich?

It depends entirely on what the chimney turns out to need, and the spread is wide. Sweeping, an inspection, a cap or a damper repair are the inexpensive end and are usually done in one visit. Relining, rebuilding above the roofline and full crown recasting are the expensive end. Nobody can quote it honestly over the phone, which is why the inspection comes first. The contractor you are introduced to sets their own prices and agrees them with you directly.

Do you cover all of Greenwich?

Yes — all 3 ZIP codes in Greenwich and the surrounding towns. Tell us where you are and we put you in touch with a company that covers it.

How quickly can someone get to me in Greenwich?

For a routine inspection or sweep, usually within a few days, and sooner outside the fall rush. Late spring through early fall is the quiet season and the easiest time to book. If you have had a chimney fire, or you can smell gas or have a carbon monoxide alarm sounding, that is not a scheduling question — leave the building and call emergency services from outside.

Can I just seal it myself?

A flexible crown coating on a sound crown is within reach of a careful homeowner who is safe on a roof. Cast repairs and anything structural are not, and the risk of working at that height is the main argument against.

How long does a properly cast crown last?

Decades, where it is correctly shaped with an overhang and an expansion joint. The failures that come back early are almost always the ones with no overhang, or cast too thin.

Neighborhoods we cover in Greenwich

Chimney work across Greenwich and the areas around it.

  • Belle Haven
  • Bruce Museum
  • Byram
  • Glenville Road Corridor
  • Greenwich Cove Area
  • Greenwich Point Park
  • Mead Point
  • Milbank
  • Old Greenwich
  • Pemberwick
  • Riverside
  • Shorelands
Call now How it works