Independent contractors, licensed in CT

Covering 32 ZIP codes

Chase Cover Replacement in Hartford, CT

If there are orange streaks running down your chimney, the cause is almost always the metal lid on top of it rather than anything wrong with the siding or the masonry.

  • Covering 32 Hartford ZIP codes
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about a chase cover in Hartford

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chase Cover Replacement in Hartford, Connecticut

What to ask for on Chase Cover Replacement in Hartford

  • Stainless covers made to measure
  • Cross-break so water drains
  • Correct collar and storm seal
  • Fitted with a cap where needed
Call about a chase cover
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Hartford. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Crown rebuilt with a drip edge in Hartford, CT
Crown rebuilt with a drip edge Cast and sloped away from the flue with an expansion joint at the tile, so water drips clear of the brick instead of running down it.
Joints raked back and repointed in Hartford, CT
Joints raked back and repointed Mortar matched to the masonry, because mortar harder than the brick makes the brick the sacrificial part.
Stainless liner sized to the appliance in Hartford, CT
Stainless liner sized to the appliance Diameter taken from the manufacturer venting tables, insulated where the chimney runs cold.

Chase Cover Replacement in Hartford

The systems we see in Hartford tend to share a history — a heating system replaced once or twice, cooling added later, and ductwork extended as rooms were added rather than designed for the house as it now stands. Most comfort complaints here start there.

About 38% of homes in Hartford were built before 1940 — old enough to have been built with radiators and no ductwork at all; 67% of them heat with natural gas, so oversized flues left behind by an earlier fuel are the recurring finding here. (US Census ACS 2022)

What a chase cover is and why the cheap ones fail

Where a chimney is a framed and clad chase rather than masonry, the top is closed by a sheet-metal cover with a collar around the flue pipe. Builders frequently fit a flat galvanized cover, because it is the least expensive option available.

Flat is the problem. Water sits in the middle instead of running off, and standing water on galvanized steel corrodes it from the top down. Once it perforates, water goes straight into the chase — onto the framing, onto the insulation, and down the inside of the structure — while the visible symptom is only the rust staining outside.

Why stainless with a cross-break

A cross-break is a shallow ridge pressed into the sheet so the surface is not flat and water is forced to the edges. Combined with stainless rather than galvanized, that removes both failure mechanisms at once. It costs more than the builder's cover and it is the last one the chimney needs.

The collar and the storm seal

The cover has to seal around the flue pipe where it passes through. A collar with a proper storm seal does that; a bead of silicone does not, and it is where a lot of otherwise decent covers leak.

What the streaking is telling you

Rust runoff is the late symptom. By the time it is visible on the siding, the cover has been holding water for years and has probably already perforated. What matters is what has been happening inside the chase in the meantime.

Check the chase interior

Water entering a framed chase wets framing and insulation and has nowhere to dry. Before a new cover goes on, the inside is worth looking at, because replacing the lid over rotted framing solves the wrong half of the problem.

On the shoreline, it happens faster

Salt air accelerates the corrosion considerably. Along the Sound and the southeastern shoreline a galvanized cover can be failing in a handful of years, which is why stainless is effectively the only sensible specification near the water.

The full guide: everything about chase cover replacement — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Hartford.

Areas we cover in Hartford

Our Hartford coverage takes in the neighborhoods around Albany Avenue corridor, Ancient Burying Ground, Barry Square and Behind the Rocks.

Chase Cover Replacement in Hartford — FAQs

Should the chimney be repaired or rebuilt?

It depends how far the damage goes. If a key scrapes mortar out but the brick is intact, that is repointing. Once brick faces have flaked through, a brick can be rocked by hand, or the stack leans, repointing has nothing sound to bond to and a rebuild is the honest answer. Most rebuilds stop at the roofline, because that is the section taking weather from every side.

Do you charge for a quote in Hartford?

We charge nothing at any point — contractors pay us, you never do. What a company charges to attend or to carry out an inspection is theirs to set, so agree it with them before they come out. An inspection is a real piece of work with a written report attached, and it is reasonable for it to be chargeable.

How often should a chimney be inspected?

Annually, whatever it vents — that is the NFPA 211 standard and it covers gas and oil appliances as well as wood. Sweeping frequency is separate and depends on what and how much you burn. An appliance used twice a year still needs the annual look, and those are the ones where neglected faults turn up.

Do we need a chimney liner?

If a camera survey finds cracked tile, washed-out joints or a separated liner, yes. You also need one whenever the flue is the wrong size for the appliance now venting into it, which is the common case after any change of fuel or appliance. A liner is sized from the appliance manufacturer venting tables, not from what happens to fit down the chimney.

What does a Level 2 inspection include?

Everything in a Level 1 visual check, plus a camera survey of the entire flue and an examination of accessible attic, crawl space and basement areas. It is required on a property transfer, on any change of fuel or appliance, and after a chimney fire. A general home inspection does not include it.

Is chimney waterproofing worth doing?

On sound, porous, exposed masonry it genuinely slows the water absorption that destroys brick. On masonry that has already started to flake it is worse than doing nothing, because it traps water behind the damaged face. And it has to be a breathable repellent rather than a film-forming sealant — the film is what causes the damage people then blame on waterproofing.

Is the rust coming from my chimney or my roof?

On a sided chase, almost always the chase cover. Masonry chimneys stain differently — efflorescence is white, not orange. Orange streaking on siding or stucco below a chase is the cover.

Can a chase cover be patched?

Temporarily. Once it has perforated it is thin everywhere, and a patch simply moves where the next hole appears. Replacement is the repair.

Neighborhoods we cover in Hartford

Chimney work across Hartford and the areas around it.

  • Ancient Burying Ground
  • Bloomfield Center
  • Capitol District
  • Central Downtown Hartford
  • Clay Arsenal
  • Connecticut Executive Residence
  • Dove Valley Regional Park
  • Downtown South End
  • Elmwood Village South
  • Frog Hollow South
  • Hill-Stead Museum
  • Keney Park
  • Mill Brook Park
  • Northeast
  • Pleasant Valley Way
  • Scenic South End
  • Stanley-Whitman House
  • Trinity College Hills
Call now How it works