Covering 1 ZIP code
Chimney Waterproofing in New London, CT
Brick absorbs water. In a state with as many freeze cycles as this one, that is how masonry fails — and a breathable repellent on sound brick is the cheapest thing that slows it down.
- Covering 1 New London ZIP code
- Free to use, no obligation
Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.
Call about waterproofing in New London
(844) 785-4066Free to use, and there is nothing to pay us. You are never committed to going ahead.
What happens when you call
- You describe the problem and where you are.
- We put you in touch with a licensed contractor covering that area.
- They arrange the visit and agree the price with you directly.
Worth having to hand
- Roughly how old the system is
- What it is doing — or not doing
- Your ZIP code
What to ask for on Chimney Waterproofing in New London
- Breathable siloxane, not film-forming sealant
- Applied after repointing, never before
- Vapor-permeable so masonry can dry
- Ten-year products where suitable
- Licensed & insured We match you with contractors who hold current licensing and cover.
- Know what to ask Every page says what decides the price, so you can judge a quote.
- Free to use We never charge you. Compare quotes and walk away at any point.
- Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.
How it works
Three steps, no obligation at any of them.
-
1
Call and tell us what is wrong
Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.
-
2
A local contractor gets in touch
A local chimney company contacts you to discuss the problem and arrange a visit in New London. What they charge to attend or diagnose is theirs to set, so agree it with them up front.
-
3
You decide
Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.
What these repairs look like
Illustrative examples of the work described here. More in our disclaimer.
Chimney Waterproofing in New London
The systems we see in New London tend to share a history — a heating system replaced once or twice, cooling added later, and ductwork extended as rooms were added rather than designed for the house as it now stands. Most comfort complaints here start there.
About 48% of homes in New London were built before 1940 — old enough to have been built with radiators and no ductwork at all; 25% of them still heat with oil, and oil condensate is acidic enough that those flues deteriorate from the inside where nobody looks. (US Census ACS 2022)
Breathable versus film-forming, and why it decides everything
A siloxane or silane repellent penetrates the masonry and lines the pores so liquid water cannot enter, while leaving them open enough for water vapor to leave. Masonry that gets damp can still dry out.
A film-forming sealant — acrylic, urethane, anything that leaves a visible sheen — does the opposite. It stops liquid water entering and it stops vapor leaving. Any moisture already in the wall, or arriving from behind, is trapped. It then freezes, and it takes the face off the brick from the inside. More Connecticut chimneys have been damaged by the wrong sealant than saved by the right one.
How to tell what you are being sold
Ask whether the product is vapor-permeable and ask for the data sheet. A repellent should darken the masonry while wet and leave it looking essentially unchanged when dry. Anything that leaves a gloss is the wrong product.
Coverage and reapplication
Good siloxane products carry warranties around ten years. Reapplication is straightforward because there is no film to strip. The masonry has to be clean and dry going on, which in Connecticut means a settled dry spell rather than a gap between showers.
Sequence matters more than product
Waterproofing is a finishing step. Applied to brick that is already spalling, it seals water inside the damaged face and accelerates the failure. Applied before repointing, it interferes with the new mortar bonding. Applied to a chimney whose crown is cracked, it does nothing about the water coming in from the top, which is where most of it comes from.
The right order
Fix the crown, repoint or rebuild what has failed, sort the flashing, fit a cap. Then waterproof what is sound. Anyone offering to waterproof a visibly deteriorated chimney as the first step is selling the wrong thing.
It is not a repair
A repellent slows water absorption into sound masonry. It does not bridge cracks, it does not replace mortar, and it will not stop a leak. Expecting it to do any of those is how people conclude waterproofing does not work.
The full guide: everything about chimney waterproofing — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in New London.
Areas we cover in New London
Our New London coverage takes in the neighborhoods around Alewife Cove, Colman, Downtown and Willetts.
Chimney Waterproofing in New London — FAQs
What does a Level 2 inspection include?
Everything in a Level 1 visual check, plus a camera survey of the entire flue and an examination of accessible attic, crawl space and basement areas. It is required on a property transfer, on any change of fuel or appliance, and after a chimney fire. A general home inspection does not include it.
Is chimney waterproofing worth doing?
On sound, porous, exposed masonry it genuinely slows the water absorption that destroys brick. On masonry that has already started to flake it is worse than doing nothing, because it traps water behind the damaged face. And it has to be a breathable repellent rather than a film-forming sealant — the film is what causes the damage people then blame on waterproofing.
What qualifications should a New London chimney company have?
Ask for three things and check them: current liability insurance, CSIA certification from the Chimney Safety Institute of America, and whatever license or registration your state requires for the work in question. Ask to see the documents rather than taking the logo on the van as proof. For anything involving gas appliance venting, ask separately who is pulling the permit.
Can you work on a rental or multi-family property in New London?
Yes. Ask for the findings in writing so a landlord or managing agent can act on them. In multi-family buildings the usual complication is the stack itself — one chimney frequently carries flues for several units with different owners, so establishing whose flue is whose comes before anyone quotes work.
My New London house is pre-war — what does that change?
About 48% of housing in New London predates 1940, and chimneys of that age behave differently. Many were built before flue tile was standard, so the flue is brick and mortar joints with no lining at all. Most have also changed fuel at least once without being resized. And the masonry itself is softer than anything made now, which means modern hard mortar does more harm than good on it. A camera survey is the only way to know which of those apply.
I heat with oil in New London — what does that mean for the flue?
Around 25% of homes here heat with oil, and oil soot is acidic. It attacks flue tile and the mortar between tiles from the inside, where a look from the roof will not find it. That is the case for a camera survey rather than a visual inspection. It also matters if you ever convert to gas: the flue will then be far too large for the new appliance and will need relining.
Is waterproofing worth doing?
On sound, porous, exposed masonry, yes — it meaningfully slows the freeze-thaw cycle that destroys brick. On already-damaged masonry it is worse than doing nothing.
How long does it last?
Typically around ten years for a quality siloxane, less on a heavily exposed stack. Reapplication is simple because nothing has to be removed first.
Other chimney services in New London
- Chimney Inspection
- Chimney Sweeping
- Chimney Relining
- Chimney Masonry Repair
- Chimney Crown Repair
- Chimney Cap Installation
- Chimney Flashing Repair
- Chimney Damper Repair
- Fireplace Repair
- Chase Cover Replacement
- Smoke Chamber Parging
- Oil-to-Gas Flue Conversion
- Coastal Chimney Protection